# ALUMINIUM CORPORATION OF INDIA LTD v. UNION OF INDIA & ORS - **Citation:** [1976] 1 S.C.R. 400 - **Court:** Supreme Court of India - **Decided:** 1975-08-22 - **Case number:** Civil Appeal No. 677 of 1968 - **Bench:** H. R. Khanna, V. R. Krishna Iyer, A. C. Gupta, S. Murtaza Fazal Ali - **Source:** https://unisonlegal.in/judgment/supreme-court-of-india/aluminium-corporation-of-india-ltd-v-union-of-india-ors-6612 - **Pages:** 7 ## Headnote Central Excise Rules, 1944-R11Ie 8 ( J )-Finance Act, 1960..-Excise duty on Ahuniniurn-lten1 27-Notification of Go\'f, of India dated lst March, 1960Exeniption for use of exciS,e paid aftuniniun1. The appellant manufactures aluminium plates, sheets, circles, strips and foils which are the end products of its compos'.,te factory, but, as intermediate products, it also turns out ingots, bars, slabs, biKets, pellets and the like which ;get consumed tnostly in the process of manufacture of plates, sheets, and other .end P.TOducts. Aluminium is first converted into items like ingots. bars, slabs, etc., but when they are used up for finished products like plates and sheets, nearly lhalf of the stuff is thrown back into scrap in which state it is remelted and starts its manufacturing journey over again. Under the Finance Act for the year 1960, Excise Duty was imposed on the aluminium. On the manufacturin).': <0f the alum!nium, plates, sheets, circles, strips and foils in any form or size, :the duty leviable ·was rupees five hundred per metric tonne. A note appended to Item 27 reads as under : "Under the Government of India, Ministry of Finance, (Department of Revenue) Notification No. 29/60 Central Excises, dated the 1st March 1960, the following aluminium manufactures, namely plates, sheets, circles, strips and foils in any form is used, are exempt from so much of the duty leviable thereon :as is in excess of Rs. 200.00 per metric tonne." The appellant manufactured certain plates, sheets etc. by using partly duty A B c D paid aluminium and partly aluminiu.m on which no duty was paid. The authoE rities under the Act disallowed exempt'.on under note to Item 27 on the ground -that the plates, sheets, etc., \Vere not manufactured exclusively out of the duty paid aluminium. Allowing the appeal, HELD : ( 1) The whole scheme of the exemption is that where ingots, bars, blocks, slabs, billets, pellets etc. magent collection of taxes, but also ready refunds of excess levies; (b) that simplicity or easy comprehensibility in drafting legislation, including rules and notifications affecting the laity, is an art found absent, although not difficult to accomplish, given a fresh approach to use of statutory language; and (c) that a fair construction-not always one adverse to the assessee-'-is permissible and proper on the part of government and the taxing officers when enforcing fiscal legislation. The appellant manufactures aluminium plates, sheets, circles strips and foils which are the end products of its composite factory, but, as intermediate products, it also turns out ingots, bars, slabs, billets, pellets and the like which get consumed mostly in the process of manufacture of plates, sheets, and other end products and rarely by way of sales of clabs -as such. The raw material, i.e., aluminium, is extracted by the company from bauxite from which ingots, slabs and the like are made which, in turn. are rolled into sheets, circles etc., for sale. It is one of the, admitted features of this manufacturing process that about 50% of the ingots, slabs and billets used for further manufacture of plates, sheets circles etc. become scrap and are melted, to be put back along with raw scrap for the purpose of recycling. In short, aluminium is first converted into items like ingots, bars, slabs etc., but when they are used up for finished products like plates and sheets, nearly half of the stuff is thrown back into scrap in whicht state it i~ remelted and starts its manufacturing journey over again. We have now indicated how there are really two stages in the course of turn-out of the finished goods. Excise duty came to be imposed 402 SUPREME COURT REPORTS (1976] 1 S.C.R. from March 1, 1960 oiJ. aluminium under the Finance Act for that'year (we are not concerned with the same duty on the same commodity imposed in prior years). Item no. 27 which relates to aluminium, reads: De':lcription of goods Aluminium (a) In any C.!Ude form including ingots, bars, blocks, slabs, billets, shots & pellets (b) Manufac.tures, the following, nan1ely, plates, sheets, circles, strips, and foils in any form or size Rate of Duty Three hundred rupees per metric tonne Five hundred rupees per metric tonne A note appended to the entry is of significance and states : "Under the Government of India, Ministry of Finance (Department of Revenue) Notification No. 29/60 Central Excises, • A n c ALUMINIUM CORP. V. UNION (Krishna Iyer, J.) 403 fix the rate of levy at Rs. 500/- for the fully manufactured aluminium products, thus making up for the levy at the rate of Rs. 3001- at an intermediate stage. But these composite mills which made both halfmannfactured and fuily manufactured items had to be granted an exemption in cases where the half-manufactured items went into further stages of manufacture after they had su[fer,ed duty. The whole scheme of the exemption, as we see it, is that where ingots, bars, blocks slabs, billets, shots and pellets made out of aluminium scrap or ocrap obtained from the virgin metal on which excise duty has already been paid, are used for making finished items like sheets, there should be a reduction pro tanto in the rate of duty leviable on the final product. Thereby the manufacturer would have paid Rs. 300/- for the items at the intermediate stage 0£ manufacture and if such items were used up in the later stages of manufacturing finished goods, he would get concession to that extent by being charged Rs. 200/- per metric tonne. We have earlier pointed out that one of the features of the manufacturing process is that when ingots, bars and the like are used for manufacturing plates, sheets, circles etc., nearly 50% of the former become scrap and have to be melted and recycled over again. Taking D note of the fact that this 50% deteriorates into scrap, although it has suffered duty as ingot, bar or block, the exemption notification included scrap metal which has suffered tax as qualifying for the concessional rate of Rs. 200/- when it eventually went into the manufacture of the final products viz., plates, sheets, circles, etc. Once we underst~nd this commonsense view, which fits in with fairness and law as expressed in the language of the notification, the resolution o{ the conflicting E contentions becomes easy, since, on the facts, there is no dispute. F G H We will now proceed to a statement of the relevant circumstances which invited the application of the exemption notification. The official materials before us establish beyond doubt- and so no serious difference between the parties is discernible-that from March, 1, 1960 to April 24, 1960 aluminium slabs which had suffered duty on semi-finished manufacture was 649.5620 MT. From this quantity of slabs, sheets,, strips and circles amounting to 283.2925 MT were manufactured, of which 188. 7336 MT were cleared by payment of duty at the rate of Rs. 200/- per MT. 1.0490 MT of sheets and strips was eligible to be cleared free of duty being for purposes of electrolysis which was duty-free. By simple arithmetic worked out by the Collector of Central Excise and forwarded to the Central Government (Annexure E), the balance of stock of finished goods manufactured out of duty paid slabs as on April 25, 1960 was 93.5099 MT. This quantity was actually cleared on payment of duty at the rate of 500/- per MT. But having been made out of dnty-paid slabs the exemption notification applied and only Rs. 200/- per MT was payable. Thus the excess collected i.e., Rs. 300/- per MT was refundable. So obvious. And yet it took an appeal to this Court (C.A. No. 635 of 1964) and a direction for reconsideration before the Central Government would reluctantly consent to refund as per order d/- 21-8-67. There is no surviving dispute on this matter. 404 SUPREME COURT REPORTS [1976] 1 s.c.R. Shri A. K. Sen, appearing for the appellant, contended that much more by way of excess exaction had been made whose return he claimed in this appeal. He relied on the figures furnished by the Collector of Central Excise in Annexure E to make good his case. For, according to that report, 'duty-paid slabs issued for Rolling Mill between March, 1, 1960 and April 24, 1960 .... 649.5620 MT. Duty Daid slabs in stock as on April 25, 1960 .... 12.9830 MT. Duty paid slabs in form of scrap and under processing 353.2865 MT. This was natural, as the manufacture of sheets, circles etc., out of slabs involved degradation of about 50o/o: into scrap which, of course, after sustaining slight losses, would go back into the re-cycling process of manufacture. Two important points need mention. The State has no case (in the order under attack) that any slabs which had suffered duty had been sold as slabs. The whole quantity had gone into manufacture of sheets, circles and what not. It is common case that from April 25, 1960 all the finished goods cleared by Excise officials had been subjected to Rs. 500/- per MT of duty. c The above facts make out, fool-proof fashion, that the entire 649 odd MT of slabs had been transformed into sheets and the like. If the latter had been cleared on payment of excise at Rs. 500/- per MT-and it is admitted to have been so done-it follows that the levy was exD cessive to the tune of Rs. 300/- per MT as the Notification granting exemption on April 20, 1960 had reduced the levy in such cases to Rs. 200/- per MT. This almost inescapable conclusion was sought to be countered by Sri Sanghi in a strenuous but unsuccessful submission which had appealed to the Central Government in its order d/- 21-8-67. The reasoning, only to be stated to be rejected, urged was that only if the sheets, cireles etc. had been mwnufactured wholly and solely out of duty-paid slabs could the exemption be enjoyed. This condition of eligibility for concessional rate of duty is beyond the notification altogether and perhaps beyond reason. True, the order of Government in revision, rejecting the refund claim states this as the solitary ground. We quote the relevant portion : · "As the wordings of the Notification would go to show, the concessional rate Of Rs. 200/- per MT was applicable only to those Aluminium manufactures, which were made out of duty paid aluminium in any crude form; this would evidently not cover a\ufl!inium manufactures made partly out of duty paid and partly out of non-duty paid crude." (emphasis, ours) We wonder where the author of this order discovers in the statutory notification the exclusion from exemption altogether manufactures 'partly out of duty paid and partly out of non-duty paid crude'. If 99% of duty paid 'crude' were used for manufacture of sheets etc., ~hould the final product be exigible to tax at Rs. 500/· per MT? Would it not virtually mean that merely because a wee bit of nun-duty paid 'crude' were mixed the party is penalised by payment at Rs. 800/- per E F G H • -.- • • • A B • c 0 E F • G H ALUMINIUM CORP, v. UNION (Krishna Iyer,].) 405 MT? An odd and unreasonable result! Shri Sanghi for the respon-· dent rightly asked whether a manufacturer who used 1 % duty paid and 99 % non-duty paid slabs in prod.ucing sheets can get away within from. liability for duty at the rate of Rs. 500/-? No, not at all. Such an assessee will get the benefit of the concessional rate (shall we call it rebate?) only to the extent of the 1 % and will be sub}ect to full payment at Rs. 500/- for the rest. If the mathematical facts are undisputed,. the factual conclusion is irrefutable. Of course, had there been failure on the part of the assessee to keep the statutory stock registers or otherwise his figures were suspicious the Collector of Excise could and would, ordinarily without fear of judicial interference, work out how much of· the raw material had borne duty already. Here the facts am free from dispute and the respondent does not even hint at the possibility of a part of the gross mass of 649.5620 MT which had been already dutied at the slab stage (some of which had been shed but reverted to the scrap state in the inevitable process of manufacture and had been thrown, as fresh raw material, into the on-going cyclic movement of· re-creation of final products) had been sold away at that intermediate level. On that footing, the appellant was entitled to pro tanto remission· as explained above. Both sfges are at one that after April 24, 1960 excise clearance of finished aluminium products was granted to the appellant on the single point levy system at Rs. 500/- per MT. The marginal mystique in interpretation bas arisen from mis-· understanding the spirit and letter of the notification where it reads, 'the virgin metal on which the appropriate Excise Duty has been paid from so much of the duty lcviable thereon as is in excess of Rs. 200.00 per metric tonne.' There ill no need to go down to the order of .the Collector of Excise and examine his reasons because it is somewhat obscure and sheds no more.light on the issue before us. To return what has been taken wrongly is as much a duty and grace of government as to levy relentlessly and fully what is due. Default in either, not altogether unfamiliar, brings down the confidence of the community in the Administration. That a party should have been pur to two expensive and elongated litigations to recover a relatively small sum is regrettable. Assuming that the tax officers have an alibi of two interpretations of the given notification, the question is whether plainer use of language is an art beyond the draftsman's skills? We think not. To liquidate obscruity in legislative language, by abandoning obsolescent vocabulary and styl·e of expression is an overdue measure if we remember the Renton Committee's observations made for British consumers but: applies a fortiori to our Republic : "There is hardly any part of our national life or of our personal lives that is not affected by one statute or another. The affairs of local authorities, nationalised industries, public corporations and private commerce are regulated by legislation. The life of the ord)nary ciqzen is affected by various provisions of the statute book from credle to grave." 406 SUPREME g)URT REPORTS (1976] 1 S.C.R. 'The rule of law is the cornerstone of democracy and how can there be .a rule of law society if the members, the bulk of whom are too poor tp buy legal services, cannot decode the legislator's law and therefore obey it ? Incomprehensible law annoys the Administration and estran_ges the citizen at a time when quick justice and less sterile litigation are the d~iderate. The command of the law can claim the allegiance of .the lay only by simplicity in legislation. The appeal, for reasons .assigned earlier, is allowed with costs. Appeal allowed. JP.H.P. A B •